500ml Aerosol

Dry PTFE is a durable lubricant containing pure PTFE to produce superior dry
'slide' results. Suitable for use as a release agent, preventing other materials
from bonding or to minimise wear and friction. Effective temperature range: -100 C
to +200 C. Use where a wet film lubricant cannot be tolerated due to dust and dirt
adherence. The thin protective, durable coating resists water, oil and solvent.
NSF H1 for use in the food and beverage sector. Does not contain silicone..
Key Features
- Dry film lubricant and release agent
- Resists water, oil and solvents
- Dry, durable coating to minimise wear
- Effective temperature range -100 C to +200 C
a wet film lubricant cannot be tolerated
- NSF H1 registered for use in the food and beverage sector
- Silicone free
Application
Highly effective dry lubricant with superior 'slip' properties. Use on chutes,
slides and pins, etc. where a wet or oily lubricant cannot be used. Particularly
effective in low load, high speed applications. Use on saw blades (cutting timber)
as an anti-stick treatment that reduces sap adhesion or moisture sticking.
Key Features

- Dry film lubricant and release agent
- Resists water, oil and solvents
- Dry, durable coating to minimise wear
- Effective temperature range -100 C to +200 C
- Use where a wet film lubricant cannot be tolerated
- NSF H1 registered for use in the food and beverage sector
- Silicone free
Application
Highly effective dry lubricant with superior 'slip' properties. Use on chutes,
slides and pins, etc. where a wet or oily lubricant cannot be used. Particularly
effective in low load, high speed applications. Use on saw blades (cutting timber)
as an anti-stick treatment that reduces sap adhesion or moisture sticking.
Directions for use
- Shake can vigorously.
- Apply a light, even coating from 15 to 25 cm.
- Re-apply as necessary.
- Caution. Do not smoke during the use of this product and avoid the contamination
of tobacco. If sprayed onto hot surfaces or if the coating is heated (over 230 C),
ensure local exhaust ventilation is applied and avoid inhalation of fumes.
- Wash hands well after use.
Technical parameters:
Description |
Spec |
APPEARANCE |
Opaque dry film |
ODOUR |
Mild hydrocarbon solvent |
SPECIFIC GRAVITY AT 20 C |
0.730 |
SOLUBILITY |
Insoluble in water and most solvents |
PRESSURE At 20 C |
3.5 Bar |
DISCHARGE RATE AT 20 C |
1.1 g/s |
TEMPERATURE RANGE |
-100 C to +200 C |
PRODUCT SIZE |
500ml Aerosol |
MANUFACTURER CODE |
1962 |
CAN32786Specialist Aerosols > Lubricants > Dry Film Food Grade