Hex Ball End L-Wrench 4.5mm PROGUARD
 
	- Ball End inserts into screw at a 25       angle
- Ball End saves time by quickly funneling tool into screw
- 25       angle allows natural hand and wrist movement
- Superior Ball End strength and working angle
- Works in hard to reach places
 More than just another L-Wrench
More than just another L-Wrench
Bondhus is committed to making the best tools on the market. Bondhus is constantly 
working to improve our tools. We are never satisfied with          good enough.          We work 
hard to make sure your new Bondhus L-Wrench is always the best tool for the job.
 
 
 

Environmentally safe, provides better tool grip, resists solvents, and is 5 times 
more corrosion resistant than competitor finishes.
 Precision 
machining is critical for a ball end tool to function optimally. Understandably, 
the smaller a ball end tip is, the more complex the task of machining becomes.
Precision 
machining is critical for a ball end tool to function optimally. Understandably, 
the smaller a ball end tip is, the more complex the task of machining becomes.
Bondhus maintains incredibly tight tolerances and close clearances between ball 
end tips and the screw head walls. Bondhus machining accurately maintains the precise 
geometric shape of the ball on all six sides. Surfaces are smooth, and corners are 
sharp and clean, even on a tool as small as .050          (1.27mm).
Precise machining results in Bondhus ball end tips having more surface area contacting 
the screw wall than any other competitor. Bondhus ball end tools far outwear the 
competition, and dramaticallye stripping. Fastener wear is also greatly reduced.

	
		|   |  |   | 
	
		| Bondhus chamfers every Hex and TORX® tool we make. This process eliminates 
		burrs and imperfections in the tool         s tip that can prevent the tool from 
		fitting properly or seating fully within the screw head. |  | Every Bondhus tool is designed and machined to achieve an optimal fit 
		between tool and fastener. Tools insert quickly and easily into screw head 
		and fit snug to generate greater torque and minimize slipping and stripping. | 
BON BH15762Screwing/Fastening/Fixing > Screwdriving Systems > Handheld Drivers > Hex